COUPON : S A S T E 5 O F F -> NEW CUSTOMERS WILL SAVE 5% OFF ON NEW ORDERS !!!
FETtec FC G4 KISS N v1.7
€ 79,90
2 in stock
- Premium Quality
- Secure Payments
- Sastekwads approved
Product description
FETtec FC G4 KISS N v1.7 Flight Controller
The “N” version of the FETtec FC G4 is a state-of-the-art flight control system for FPV drones. Compared to the standard version, it offers unique features and flexibility. With the latest STM32G473 processor and an IIM-42652 SPI gyro, the FC-G4-N offers outstanding performance and stability.
The FC-G4-N is rated for a 6-27V supply voltage (2S-6S Lipo) and features two integrated BECs of 2A each. It also offers a 5V BEC for the receiver (RX) and a configurable 5V/16V BEC for the VTX (video transmitter) with the option of connecting to a FETtec OSD board for analog system use.
In addition to the enhanced protections for the microcontroller’s IO ports, the FC-G4-N provides connectivity for ESCs, VTX, camera and OSD of the digital systems through various connectors. There are also 5 UART interfaces available. The FC-G4-N supports a variety of ESC protocols such as PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400 and FETtec Onewire.
Specifications
- Latest STM32G473 processor
- 180 MHz + Math Accelerator
- Gyro IIM-42652 SPI
- Designed for 6-27V supply voltage (2S-6S Lipo)
- 2x onboard BEC (2A each)
- 5V BEC for RX
- 5V/16V BEC for VTX (configurable and real pit*)
- Improved IO protection
- 2x 8-pin connectors for solderless ESC connection (connector 1: ESC signal 1-4, telemetry, VCC, GND; connector 2: ESC signal 5-8, telemetry, VCC, GND)
- 1x 8-pin connector for solderless connection to VTX, camera and OSD of the digital systems (real pit* VCC, GND, video in, video out, BEC 5V/16V, VCS/TX3, RX3)
- 2x 6-pin connector for serials (RX1, TX1, 3.3V, VCC, 5V, GND; RX3, VCS/TX3, RGB LED, VCC, 5V, GND)
- 1x 4-pin connector for receiver (signal, TLM, 5V, GND)
- 5 UART interfaces (UART 1 free, UART 2 occupied by receiver, UART 3 free, UART 4 free, UART 5 occupied by ESCs/TLM/Onewire)
- 4 ESC solder pads (signal/GND) at each corner
- Buzzer pads
- 4 RGB LEDs (color selectable)
- Supported ESC protocols: PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
- FETtec Alpha FC firmware (KISS FC firmware flashable)
- Connector type: JST-SH-1mm
- *Real Pit-Mode: Supply pad switchable
Dimensions:
- Maximum outer dimension: 37.2 x 37.2 mm, without mounting tabs 30 x 30 mm
- Mounting hole arrangement: 20 x 20 mm with M2 mounting holes (can be enlarged to M3), 30 x 30 mm with M3 mounting holes
- 30 x 30 mm mounting hole tabs are removable to reduce overall FC size
- Height: 7.9 mm
- Weight: 5.37 g
Firmware:
- FETtec Alpha FC firmware (KISS FC firmware flashable)
Scope of delivery:
- 1x FETtec FC G4-N v1.7
- 1x open 8-pin cable (one-sided JST connector)
- 1x open 6-pin cable (one-sided JST connector)
- 1x open 4-pin cable (one-sided JST connector)
*Real Pit mode: supply pad switchable
Discover the power and flexibility of the FETtec FC G4-N and optimize your FPV experience!
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet. Be the first one to write one.